oscilent corporation product specification oscilent corporation telephone: 1.949.252.0522 fax: 1.949.252.0522 email: sales@oscilent.com product specification www.oscilent.com rev a january 2011 oscilent controlled document ordering code / part number product description 813-if136.25m-02a 136.25mhz if saw filter 2.05mhz bandwidth specification contents o mechanical dimensions o test circuit o maximum ratings o electrical specification o frequency response o smith chart o vswr notes o electrostatic sensitive device (esd) o avoid excessive ultrasonic exposure o solderability compatible with jedec j-std-020c pb-free process, 260c peak reflow temperature o this product complies with eu dire ctive 2002/95/ec (rohs compliance)
oscilent part number 813-if136.25m-02a january 2011 rev a 136.25mhz if saw filter 2.05mhz bandwidth product specification p. 1 www.oscilent.com mechanical dimensions (mm) test circuit pin description a, b, c, d, f, g, h, i, j, l ground k input e output test fixture & values input l1=82nh, c1=36pf output l2=68nh, c1=47pf source/load impedance 50 ?
oscilent part number 813-if136.25m-02a january 2011 rev a 136.25mhz if saw filter 2.05mhz bandwidth product specification p. 2 www.oscilent.com maximum ratings parameters description unit minimum typical maximum operating temperature range c 0 - 70 storage temperature range c -40 - 85 maximum dc voltage v - - 10 maximum input power dbm - - 10 source impedance (single ended) (1) ? - 50 - load impedance (single ended) (1) ? - 50 - notes: with matching network (ref. test ing environment circ uit as shown above). those impedances could be modified wi th different impedance values and/or structures, if necessary. electrical specification parameters description unit minimum typical maximum center frequency (fo) mhz - 136.25 - insertion loss at fo db - 18.5 21.0 temperature coefficient ppm/c - -0.03 - amplitude ripple within fo 0.75 mhz db p-p - 0.4 1.0 group delay variation within fo 0.75 mhz nsec - 90 150 absolute delay at fo sec - 1.70 - bandwidth at ?1.0 db mhz 1.50 2.05 - bandwidth at ?3.0 db mhz - 2.35 - bandwidth at ?40.0 db mhz - 3.65 4.20 relative attenuation: fo 2.75 mhz db 55 60 - lower sidelobe db 50 55 - upper sidelobe db 50 55 -
oscilent part number 813-if136.25m-02a january 2011 rev a 136.25mhz if saw filter 2.05mhz bandwidth product specification p. 3 www.oscilent.com frequency response bandwidth at ?1.0 db bandwidth at ?3.0 db bandwidth at ?40.0 db attenuation fo2.75mhz
oscilent part number 813-if136.25m-02a january 2011 rev a 136.25mhz if saw filter 2.05mhz bandwidth product specification p. 4 www.oscilent.com ripple variation fo0.75mhz group delay variation fo0.75mhz smith chart
oscilent part number 813-if136.25m-02a january 2011 rev a 136.25mhz if saw filter 2.05mhz bandwidth product specification p. 5 www.oscilent.com vswr
|